Interior Resources Bunk Bed Recall

A bunk bed consists of two single beds, typically stacked above each other. Sometimes, parents opt for this design to save space or because it looks fancy. However, safety precautions must be adhered to if you choose this option. If safety standards are not met, it could lead to a recall case like this

.

Interior Resources recalled children’s steel utility bunk beds on March 27, 2025⁽¹⁾ due to the risk of serious injury or death from entrapment hazards and violations of federal regulations for bunk beds.

Although no injuries were reported, this event reinforces the importance of practicing safety when purchasing or manufacturing children’s products.

Details of the Bunk Bed Recalled by Interior Resources 

Interior Resources Recalls Children’s Steel Utility Bunk Beds Due to Risk of Serious Injury or Death from Entrapment Hazards. This violates the federal regulations for bunk beds.

The spacing between the guardrail and end support, and the spacing around the mattress supports, is greater than allowed, posing entrapment and strangulation hazards to children.

About 1,772 units of this product were affected; Interior Resources sold it to institutions in New York from January 2017 through May 2024 for about $1,800⁽¹⁾. Delweld Industries Corp., of Stoystown, Pennsylvania, manufactured it in the United States and distributed it by Interior Resources USA LLC, of New York.

Why Bunk Beds Pose a Safety Hazard

The mandatory standard for bunk beds came into effect on 7 April 2005. This standard sets out essential safety requirements for bunk beds and other elevated beds used in domestic situations, nurseries, and institutions. It prevents injuries and SIDS through entrapments.

For instance, a sleeping child rolling out (through the use of guardrails) can lead to entrapment if the spacing between the guardrails does not meet safety standards. This standard also prevents asphyxiation through entrapment or snagging on elements of the bunk bed.

Entrapment is a mechanical interference with respiration when the head and neck are caught in a tight place or position, such as a gap in play equipment, a bunk bed barrier, between balcony rails, or in a car window.⁽²⁾

Some other reasons bunk beds may be unsafe include behavioral elements, such as children of certain ages getting injured from playing on the bunk bed rather than sleeping in it. Falls from bunk beds are the most common cause of injury. Also, some children get injured by being hit by a ceiling fan while using a bunk bed.⁽³⁾

Bunk beds can violate federal safety regulations for children's furniture in several ways. Here are some common ways they may fail to meet safety standards:

Insufficient Guardrails: The U.S. Consumer Product Safety Commission (CPSC) requires that both sides of the upper bunk have guardrails to prevent falls. If the bed has missing, weak, or improperly sized guardrails, it poses a fall risk. The top edge of the guardrail must be at least 5 inches above the mattress to prevent rollovers.

Gaps and Entrapment Hazards: Openings in the guardrails or between the mattress and the bed frame must be small enough to prevent head, arm, or leg entrapment. Gaps larger than 3.5 inches can trap a child's head, leading to suffocation or strangulation.⁽⁴⁾

Defective or Weak Ladder Design: To prevent falls, the ladder must be securely attached, sturdy, and slip-resistant. If it is wobbly, has missing rungs, or lacks grip features, it increases the risk of falls.

Excessive Height of Upper Bunk: The upper bunk should be safe from the ceiling to prevent head injuries or contact with ceiling fans. If the bed is too tall, children can hit their heads or suffer serious injuries when jumping or standing up.

Lack of Warning Labels and Assembly Instructions: Federal law requires manufacturers to provide clear warning labels and assembly instructions for bunk bed safety. If these are missing or unclear, it will be easy to assemble the bed incorrectly, leading to instability or improper use.

Use of Toxic Materials: Some bunk beds may contain toxic paints, finishes, or materials that exceed legal limits for lead and formaldehyde. If the materials fail to meet CPSC, ASTM, or EPA safety standards, they pose health risks like respiratory issues and developmental delays.

What You Need to Do Immediately About the Recalled Products

If you own one of these recalled products, you should disassemble the bunk beds immediately until repaired. Contact Interior Resources for disassembly instructions and to receive a free repair kit. This includes shipping. You will also need to schedule a professional to install the repair kit when it becomes available from the manufacturer. The repair kit will reduce the spacing between the guardrail and end support and the spacing around the mattress supports.⁽¹⁾

Interior Resources has contacted all known purchasers directly. In case you are not contacted, you can reach them using these resources:

Interior Resources can be reached at 800-397-7776 from 9 a.m. to 5 p.m. ET, Monday through Friday, via email at info@interiorresourcesusa.com, or online at interior resources or the interior resources website.

If you are experiencing issues with this recall remedy or believe the company is not responding to your remedy request, please use this form to explain the situation to CPSC.

This helps validate the safety of your products repeatedly. To check if your bunk bed was recalled, visit the Consumer Product Safety Commission (CPSC) website or the manufacturer’s website for recall alerts.

How to Ensure Your Children’s Bunk Bed is Safe

Several organizations, the most notable of which are ASTM, CPSC, and ANSI, set strict regulations to protect children from bunk bed hazards worldwide.

ASTM International (American Society for Testing and Materials) sets voluntary but widely adopted safety guidelines. ASTM F1427-21 is the primary bunk bed safety standard, covering structural integrity, guardrail requirements, and weight capacity. ⁽⁵⁾

CPSC (Consumer Product Safety Commission – U.S.) protects the public from unreasonable risks of injury or death from various consumer products. It also regulates recalls and takes action against unsafe products.

ANSI (American National Standards Institute) works alongside ASTM and CPSC to ensure that bunks meet U.S. safety requirements.

To ensure your children’s bunk bed is safe, follow these simple guidelines:

• Only use a bunk bed if it meets current safety standards. These standards were developed to prevent fatal entrapment injuries to children resulting from improper guardrail spacing and other design flaws.

• Ensure your bunk bed has a guardrail on the wall side of the bed. Children can become wedged between the wall and mattress or frame; a guardrail on the wall side can help prevent this on both bunks.

• Never allow a child under 6 years old to use the top bunk, as they are at higher risk for entrapment due to their body size.

• Ensure the mattress is the correct size and fits snugly, with no more than a 3 cm gap on any side.

• Children should never tie ropes or cords to bunk beds, furniture, or fixtures.

If you follow these simple guidelines, your children's safety is more assured around bunk beds.